P2802 - Transmission Range Sensor B Circuit Low
WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
P2802 - TRANSMISSION RANGE SENSOR B CIRCUIT LOW
| Description: | The powertrain control module (PCM) checks the gear selector position by monitoring three independent voltage signals from the transmission range (TR) sensor. The TR voltages are then compared to an allowed voltage range for each gear. The test fails when the compared voltages are out of range. This DTC indicates that one TR signal is low. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Monitor the TR_A1, TR_A2, and TR_A3 sensor voltage PIDs. The TR_A1 sensor voltage has a negative slope, and TR_A2, and TR_A3 sensor voltages have a positive slope. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST TA . | ||