LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2283 (Engine Controls - Powertrain DTC Charts & Descriptions - (Hybrid)) >> DTC Diagnosis >> P0A1B - Drive Motor A Control Module

P0A1B - Drive Motor A Control Module

WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
P0A1B - DRIVE MOTOR A CONTROL MODULE

Description:  This DTC indicates a drive motor A control module (MCM) internal concern.
Possible Causes: 
  • MCM processor concern
  • MCM A/D converter concern
  • MCM supply voltage out of range
  • TCM-MCM serial link concern
Diagnostic Aids: 
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All See Note 1U0418 - INVALID DATA RECEIVED FROM BRAKE SYSTEM CONTROL MODULE  - See Note 3U0418 - INVALID DATA RECEIVED FROM BRAKE SYSTEM CONTROL MODULE