P0610 - Control Module Vehicle Options Error
WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
P0610 - CONTROL MODULE VEHICLE OPTIONS ERROR
| Description: | Indicates a powertrain control module (PCM) vehicle options error. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Reprogram or update the calibration. Check for other DTCs or drive symptoms for further action. Make sure to check for aftermarket performance products before installing a new PCM. If it is necessary to install a new PCM, refer to FLASH ELECTRICALLY ERASABLE PROGRAMMABLE READ ONLY MEMORY (EEPROM) , Programming the VID Block for a Replacement PCM. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | Refer to the P0613 - TRANSAXLE CONTROL MODULE (TCM) PROCESSOR Description, Possible Causes and Diagnostic Aids for the DTC. | ||