P0573 - Brake Switch A Circuit High
WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
P0573 - BRAKE SWITCH A CIRCUIT HIGH
| Description: | This DTC indicates the brake switch is stuck in the OFF position. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Using the scan tool, check the BPP/BOO PID. The BPP/BOO PID should toggle on and off with brake pedal activation. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST FD . | ||