LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2283 (Engine Controls - Powertrain DTC Charts & Descriptions - (Hybrid)) >> DTC Diagnosis >> P0572 - Brake Switch A Circuit Low

P0572 - Brake Switch A Circuit Low

WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
P0572 - BRAKE SWITCH A CIRCUIT LOW

Description:  This DTC indicates the brake switch is stuck in the ON position.
Possible Causes: 
  • Open or short in the BPP circuit
  • Open or short in the stoplamp circuits
  • Damaged brake switch
  • Incorrectly adjusted brake switch
Diagnostic Aids:  Using the scan tool, check the BPP/BOO PID. The BPP/BOO PID should toggle on and off with brake pedal activation.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All GO to PINPOINT TEST FD .