LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2281 (Engine Controls - Diagnostic Methods - (Hybrid)) >> Transaxle Control Module (TCM) Reprogramming >> Description

Transaxle Control Module (TCM) Reprogramming: Description

WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: After the TCM is successfully reprogrammed, clear the continuous diagnostic trouble codes (DTCs) in the powertrain control module (PCM) and the TCM that may have been stored during reprogramming.

Changes made to the strategy or calibration may require TCM reprogramming. Refer to the Module Programming instructions on the scan tool.

scientia non olet · About LEMON Manuals