LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2269 (Automatic Transmission Cooling System) >> Removal And Installation >> Auxiliary Transmission Fluid Cooler >> Installation

Auxiliary Transmission Fluid Cooler: Installation

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the OTA auxiliary transmission fluid cooler and the 3 bolts.
    • Tighten to 8 Nm (71 lb-in).
  2. Connect the transmission fluid cooler hoses to the OTA auxiliary transmission fluid cooler. Install the hose clamps.
  3. Install the radiator grille.
  4. Fill the transmission with the specified type and quantity of clean transmission fluid. For additional information, refer to AUTOMATIC TRANSAXLE/TRANSMISSION - 4R70E/4R75E article or AUTOMATIC TRANSAXLE/TRANSMISSION - TORQSHIFT article.
  5. Check for leaks.
scientia non olet · About LEMON Manuals