LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2255 (Electronic Engine Controls - Gasoline Engines) >> Removal And Installation >> Camshaft Position (CMP) Sensor >> Notes

Camshaft Position (CMP) Sensor: Notes

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
Material

Item Specification
Motorcraft SAE 5W-20 Premium Synthetic Blend Motor Oil
XO-5W20-QSP (US); Motorcraft SAE 5W-20 Super Premium Motor Oil CXO-5W20-LSP12 (Canada); or equivalent
WSS-M2C930-A
NOTE: 4.6L shown, 5.4L and 6.8L similar.
Fig 1: Exploded View Of Camshaft Position CMP Sensor With Torque Specifications
GF0012067Courtesy of FORD MOTOR CO.
Item Part Number Description
1 - Camshaft position (CMP) sensor electrical connector (part of 12B637)
2 N806155-S CMP sensor bolt
3 6B288 CMP sensor
4 - CMP sensor O-ring seal (part of 6B288)