LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2252 (Automatic Transmission - 5R110W (TORQSHIFT(R))) >> Disassembly And Assembly Of Subassemblies >> Forward Geartrain - Assembly >> Assembly

Forward Geartrain - Assembly: Assembly

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the forward clutch assembly into the direct clutch assembly.
    2. Fig 1: Locating Forward Clutch Assembly
    GF0006956Courtesy of FORD MOTOR CO.
  2. Install the No. 9 forward clutch bearing.
    3. Fig 2: No. 9 Forward Clutch Bearing
    GF0006957Courtesy of FORD MOTOR CO.
  3. Install the forward hub and ring gear assembly.
    4. Fig 3: Locating Forward Hub And Ring Gear Assembly
    GF0006958Courtesy of FORD MOTOR CO.
  4. Install the planet carrier and bearing assembly.
    5. Fig 4: Locating Planet Carrier And Bearing Assembly
    GF0006959Courtesy of FORD MOTOR CO.
  5. Install the No. 12 thrust bearing onto the forward carrier assembly.
    6. Fig 5: Locating No. 12 Thrust Bearing
    GF0006960Courtesy of FORD MOTOR CO.
  6. Install the input shell assembly.
    • Make sure the tab is engaged in the forward clutch assembly.
    7. Fig 6: Making Sure Tab Is Engaged In Forward Clutch Assembly
    GF0044780Courtesy of FORD MOTOR CO.
  7. Install the Adapter and the Transmission Forward Clutch Assembly Installer. Position aside to use during transmission assembly.
    8. Fig 7: Installing Adapter & Transmission Forward Clutch Assembly Installer
    GF0044781Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals