LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2247 (Fuel Charging And Controls - 6.0L (99P E-Series) Diesel) >> Specifications >> Torque Specifications

Torque Specifications

WARNING: This page is about a different car, the 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS

Description Nm lb-ft lb-in
Charge Air Cooler (CAC) tube clamp 12 - 106
Crankcase-to-head tube 82 60 -
Fuel Injection Control Pressure (ICP) sensor 12 (N.m) - 106 (lb.in)
Fuel Injection Pressure Regulator (IPR) valve 50 (N.m) 37 (lb.ft) -
Fuel injector hold-down bolt 35 (N.m) 26 (lb.ft) -
Fuel rail plug assembly 27 (N.m) 20 (lb-ft) -
Fuel return tube nut 43 32 -
Ground wire bolt 8 - 71
High-pressure oil pump cover bolts 11 - 97
High-pressure oil pump discharge tube mounting bolts 11 - 97
High-pressure oil pump mounting bolts 31 23 -
High-pressure oil raila - - -
Manifold Absolute Pressure (MAP) sensor bolt 5 (N.m) - 44 (lb-in)
Rear heat shield bolts 49 36 -
Rear heat shield bolts (M6 x 1.0 x 1.2) 11 - 97
Secondary fuel filter cover 14 - 124
Pipe Plugs 
1/8 x 27 9 - 80
1/4 x 18 21 15 -
3/8 x 18 37 27 -
1/2 x 14 36 27 -

a Refer to the procedure.