LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2243 (Engine - 6.8L) >> In-Vehicle Servicing >> Hydraulic Lash Adjuster >> Removal

Hydraulic Lash Adjuster: Removal

WARNING: This page is about a different car, the 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the camshaft roller followers. For additional information, refer to Camshaft Roller Follower .
    2. CAUTION: The hydraulic lash adjusters must be installed in their original locations. Record the hydraulic lash adjuster locations. Failure to follow these instructions may result in engine damage.
  2. Remove the hydraulic lash adjusters.
scientia non olet · About LEMON Manuals