LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2237 (Engine - 4.6L And 5.4L) >> In-Vehicle Servicing >> Oil Pump >> Removal

Oil Pump: Removal

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the oil pan. For additional information, refer to Oil Pan .
  2. Remove the crankshaft sprocket. For additional information, refer to Timing Drive Components - Windsor Engine (5.4L)  or Timing Drive Components - Romeo Engine (4.6L) .
  3. Remove the 3 bolts and the oil pump.
    4. Fig 1: Locating Oil Pump Bolts
    G03962525Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals