LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2237 (Engine - 4.6L And 5.4L) >> In-Vehicle Servicing >> Oil Cooler >> Removal

Oil Cooler: Removal

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING AND LIFTING article.
  2. Drain the engine cooling system. For additional information, refer to ENGINE COOLING article.
  3. Drain the engine oil.
    4. Fig 1: Engine Oil Drain Plug
    GF0002670Courtesy of FORD MOTOR CO.
  4. Disconnect the 2 coolant hoses from the oil cooler.
  5. Remove and discard the oil filter.
    6. CAUTION: If metal or aluminum foreign material is present in the oil cooler, mechanical concerns exist. To diagnose mechanical concerns, refer to ENGINE SYSTEM - GENERAL INFORMATION article. Failure to follow this instruction may result in engine damage.
  6. Remove the threaded insert and discard the oil cooler.
scientia non olet · About LEMON Manuals