LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2229 (Steering Column Switches) >> Diagnostic Tests >> Steering Column Switches >> Pinpoint Tests >> Pinpoint Test A: No Power in All Ignition Switch Positions >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

The battery junction box (BJB) provides the ignition switch with fused battery power through BJB fuse 7 (60A) along circuit 1050 (LG/VT). The ignition switch then provides power to the central junction box (CJB) through several different circuits depending on the ignition switch position. The ignition switch has 4 possible positions:

This pinpoint test is intended to diagnose the following: