LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2229 (Steering Column Switches) >> Diagnostic Tests >> Steering Column Switches >> Inspection and Verification

Inspection and Verification

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify the customer concern.
  2. Visually inspect for the following obvious signs of mechanical or electrical damage.
    VISUAL INSPECTION CHART

    Mechanical Electrical
    • Multi-function switch
    • Ignition switch
    • Steering column shrouds
    • Fusible link(s):
      • A (12 gauge, YE)
      • B (12 gauge, YE)
    • Battery junction box (BJB) fuse 7 (60A)
    • Central junction box (CJB) fuse(s):
      • 1 (5A)
      • 2 (10A)
      • 3 (15A)
      • 6 (10A)
      • 7 (10A)
      • 8 (15A)
      • 9 (5A)
      • 12 (15A)
      • 13 (15A)
      • 14 (5A)
      • 20 (10A)
      • 27 (5A)
      • 33 (10A)
    • Wiring, terminals or connectors
    NOTE: For multi-function switch concerns, refer to one of the following sections:
  3. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.
  4. If the fault is not visually evident, determine the symptom. Go to Symptom Chart .