LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2220 (Supplemental Inflatable Restraint System) >> Diagnostic Tests >> Air Bag and Safety Belt Pretensioner Supplemental Restraint System (SRS) >> Diagnostic Instructions >> DataLogger PID/Data

DataLogger PID/Data

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

The DataLogger PID/Data option allows the scan tool operator to read the state of several PIDs to aid in diagnosing the system. PIDs are real time measurements of parameters, such as voltages and resistances, calculated by the restraints control module (RCM) sent to the scan tool for display.

To retrieve PIDs, follow these steps:

  1. Connect the scan tool to the DLC.
  2. Turn the ignition switch to the ON position.
  3. Follow the manufacturer's instructions for the scan tool being used.
  4. Select DataLogger.
  5. Select RCM.
scientia non olet · About LEMON Manuals