Seat Cushion Cover - Rear, Bucket: Removal
WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the seat cushion. For additional information, refer to Seat Cushion - Rear, Bucket .
- Release the cushion trim cover J-clips.
- Invert the cushion trim cover, release the hook-and-loop strip and remove.
- To install, reverse the removal procedure.
CAUTION:
Use care when separating the seat cushion trim cover from the hook-and-loop strip, or the hook-and-loop strip can be torn from the seat cushion foam pad.