Normal Operation
WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
The seat control switch is powered by battery voltage through circuit 517 (BK/WH) and is grounded by circuit 57 (BK). The seat control switch then routes power and ground to the appropriate circuits to operate the seat motors.
This pinpoint test is intended to diagnose the following:
- Fuse
- Wiring, terminals or connectors
- Seat control switch