LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2216 (Interior Lighting) >> Removal And Installation >> Map Reading Lamp Bulb >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Rotate both map reading lamps to the stop position, then continue until both map reading lamps are in the vertical position.
    2. Fig 1: Rotating Map Reading Lamps
    GF0012949Courtesy of FORD MOTOR CO.
  2. Remove the 2 map reading lamp screws.
    3. Fig 2: Map Reading Lamp Screws
    GF0012950Courtesy of FORD MOTOR CO.
  3. Remove the map reading lamp from the headliner retainer.
    • Disconnect the electrical connectors.
    4. Fig 3: Map Reading Lamp & Electrical Connector
    GF0012951Courtesy of FORD MOTOR CO.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals