LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2202 (Engine System - General Information) >> General Procedures >> Cylinder Bore Out-of-Round

Cylinder Bore Out-of-Round

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Refer to SPECIFICATIONS .
  1. Measure the cylinder bore in 2 directions. The difference is the out-of-round.
    2. Fig 1: Identifying Cylinder Bore Out-Of-Round Measuring Directions
    GF0000186Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals