LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2202 (Engine System - General Information) >> General Procedures >> Connecting Rod to Crankshaft Side Clearance

Connecting Rod to Crankshaft Side Clearance

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools

Illustration Tool Name Tool Number
GF0000216
 Feeler Gauge Set 303-D027 (D81L-4201-A) or equivalent
NOTE: Refer to SPECIFICATIONS .
  1. Using the Feeler Gauge Set, measure the clearance between the connecting rod and the crankshaft. Verify the measurement is within specification.
    2. Fig 1: Measuring Clearance Between Connecting Rod & Crankshaft Using Feeler Gauge Set
    GF0040876Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals