LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2194 (Parking Aid System) >> Removal And Installation >> Parking Aid Switch >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2008 Mercury Mariner and 2008 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the lower instrument panel center finish panel. For additional information, refer to INSTRUMENT PANEL AND CONSOLE article.
  2. Press the retaining tabs and remove the parking aid switch.
  3. To install, reverse the removal procedure.