LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2187 (Automatic Transmission External Control System - (Hybrid)) >> Removal And Installation >> Selector Lever Knob >> Removal

Selector Lever Knob: Removal

WARNING: This page is about a different car, the 2008 Mercury Mariner and 2008 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the selector lever knob trim covers by carefully prying out on the bottom front corners and then pry out on the top front corner and remove the covers.
    2. Fig 1: Identifying Selector Lever Trim Covers
    GF0042433Courtesy of FORD MOTOR CO.
  2. Remove the 2 selector lever knob screws and remove the selector lever knob.
    3. Fig 2: Identifying Screws
    GF0042434Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals