LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2172 (Drum Brake System) >> General Procedures >> Brake Shoe Adjustment

Brake Shoe Adjustment

WARNING: This page is about a different car, the 2008 Mercury Mariner and 2008 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools

Illustration Tool Name Tool Number
GF0003391Courtesy of FORD MOTOR CO.
 Brake Adjustment Gauge 206-D002 (D81L-1103-A) or equivalent
  1. Remove the brake drum. For additional information, refer to Brake Drum .
  2. Using the special tool, measure the inside diameter of the brake drum.
    3. Fig 1: Measuring Inside Diameter Of Brake Drum
    GF0024641Courtesy of FORD MOTOR CO.
  3. Position the special tool on the brake shoes and linings and adjust accordingly.
    4. Fig 2: Adjusting Shoes To Measurement
    GF0024642Courtesy of FORD MOTOR CO.
  4. Install the brake drum. For additional information, refer to Brake Drum .
scientia non olet · About LEMON Manuals