LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2153 (Engine - 3.0L (4V)) >> Disassembly And Assembly Of Subassemblies >> Cylinder Head >> Disassembly

Cylinder Head: Disassembly

WARNING: This page is about a different car, the 2008 Mercury Mariner and 2008 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: If the components are to be reinstalled, they must be installed in the same positions. Mark the components removed for locations. If not reassembled in their original positions, severe engine damage may occur.
  1. Using the special tool, remove the keys, retainer and spring.
    2. Fig 1: Identifying Special Tools (303-300 And 303-350)
    G03898516Courtesy of FORD MOTOR CO.
  2. Remove the valve from the cylinder head.
  3. Remove the valve stem seal.
scientia non olet · About LEMON Manuals