LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2131 (HVAC Auxiliary Control System - (Hybrid)) >> Specifications >> Torque Specifications

Torque Specifications

WARNING: This page is about a different car, the 2008 Mercury Mariner and 2008 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS

Description Nm lb-ft lb-in
Auxiliary airflow mode door actuator screws 2 - 18
Auxiliary climate control housing bolts 7 - 62
Auxiliary climate control fresh air inlet duct nuts 7 - 62
Auxiliary line dash panel bracket nut 6 - 53
Auxiliary line floorpan bracket nuts 6 - 53
Battery airflow duct screws 2 - 18
Battery zone valve screws 2 - 18
Battery zone valve tube-O fitting nuts 17 13 -
Front auxiliary evaporator inlet line front fitting nut 8 - 71
Front auxiliary evaporator outlet and inlet line bracket bolt 6 - 53
Front auxiliary evaporator outlet and inlet line mid-joint fitting nuts 8 - 71
Front auxiliary evaporator outlet line front fitting nut 15 11 -
Rear auxiliary evaporator inlet line tube-O fitting 10 - 89
Rear auxiliary evaporator outlet and inlet line front bracket bolt 6 - 53
Rear auxiliary evaporator outlet and inlet line rear bracket bolt 6 - 53
Rear auxiliary evaporator outlet and inlet line rear fitting nuts 8 - 71
Rear auxiliary evaporator outlet line tube-O fitting 37 27 -
Thermostatic expansion valve (TXV) stud 11 8 -
TXV-to-lower bracket nut 11 8 -
TXV-to-upper bracket bolts 8 - 71