LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2124 (Supplemental Inflatable Restraint System) >> Diagnostic Tests >> Air Bag and Safety Belt Pretensioner Supplemental Restraint System (SRS) >> Diagnostic Instructions >> Active Commands >> Occupant Classification Sensor (OCS) Module

Occupant Classification Sensor (OCS) Module

WARNING: This page is about a different car, the 2008 Mercury Mariner and 2008 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

System Reset active command sets the zero set point or rezeros the occupant classification sensor (OCS) system. Refer to Occupant Classification Sensor - Original Equipment  or Occupant Classification Sensor - Service Kit .