LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2111 (Body Panel System - Body Closures) >> Removal And Installation >> Door Hinge - Lower, Front

Door Hinge - Lower, Front

WARNING: This page is about a different car, the 2008 Mercury Mariner and 2008 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front door. For additional information, refer to Door .
  2. Remove the scuff plate trim panel pin-type retainers.
  3. Remove the scuff plate trim panel.
  4. Pull outward to release the cowl trim panel clips and remove the cowl trim panel.
  5. Remove the hinge-to-body bolts and remove the hinge.
    • To install, tighten to 24 Nm (18 lb-ft).
  6. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals