LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2102 (Engine System - General Information) >> General Procedures >> Camshaft Surface Inspection

Camshaft Surface Inspection

WARNING: This page is about a different car, the 2008 Mercury Mariner and 2008 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspect camshaft lobes for pitting or damage in the contact area. Minor pitting is acceptable outside the contact area.
  2. Fig 1: Inspecting Camshaft Lobes
    G03983578Courtesy of FORD MOTOR CO.