LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2099 (Automatic Transmission - Cd4E) >> In-Vehicle Servicing >> Transmission Range (TR) Sensor >> Removal

Transmission Range (TR) Sensor: Removal

WARNING: This page is about a different car, the 2008 Mercury Mariner and 2008 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Exploded View Of Transmission Range TR Sensor With Torque Specifications
GF0024793Courtesy of FORD MOTOR CO.
Item Part Number Description
1 - Transmission range (TR) sensor electrical connector
2 - TR sensor bolts
3 - TR sensor
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING AND LIFTING article.
  2. Remove the battery and tray. For additional information, refer to CHARGING SYSTEM - GENERAL INFORMATION article.
  3. Remove the transmission range (TR) sensor.
    1. Disconnect the TR sensor electrical connector.
    2. Remove the TR sensor retaining bolts.
    3. Remove the TR sensor.
    4. Fig 2: Identifying Transmission Range (TR) Sensor Components
    GF0024794Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals