LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2097 (Wheels & Tires) >> Removal And Installation >> Spare Tire Carrier >> Removal

Spare Tire Carrier: Removal

WARNING: This page is about a different car, the 2008 Mercury Mariner and 2008 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING AND LIFTING article.
    2. NOTE: Do not use air tools to lower the spare wheel and tire assembly.
  2. Using a suitable tool, lower and remove the spare wheel and tire assembly.
  3. Remove the shaft retaining pin on the lift assembly.
  4. Remove the shaft.
    • Push the shaft rearward from under the vehicle.
  5. Remove the 3 lift retaining bolts.
  6. Remove the lift assembly from the vehicle underbody.
scientia non olet · About LEMON Manuals