LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2090 (Engine Controls - Powertrain DTC Charts And Descriptions (Except Diesel & Hybrid)) >> DTC Diagnosis >> P1639 - Vehicle Id (VID) Block Corrupted, Not Programmed

P1639 - Vehicle Id (VID) Block Corrupted, Not Programmed

WARNING: This page does not describe the selected car, but rather 32 other vehicles, including the 2008 Mercury Sable, 2008 Mercury Mountaineer, 2008 Mercury Milan, 2008 Mercury Mariner, and 2008 Mercury Grand Marquis. However, it is still accessible from the selected car via links, so may be relevant.
P1639 - VEHICLE ID (VID) BLOCK CORRUPTED, NOT PROGRAMMED

Description:  This DTC indicates the VID block is not programmed or the information within is corrupt.
Possible Causes: 
  • New powertrain control module (PCM)
  • Incorrect PCM
  • Incorrect VID configuration
Diagnostic Aids:  Program the PCM to the most recent calibration available.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All   The VID block must be programmed. Refer toFLASH ELECTRICALLY ERASABLE PROGRAMMABLE READ ONLY MEMORY (EEPROM) , Making Changes to the VID Block.
scientia non olet · About LEMON Manuals