LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2090 (Engine Controls - Powertrain DTC Charts And Descriptions (Except Diesel & Hybrid)) >> DTC Diagnosis >> P0690 - Electronic Control Module (ECM)/Powertrain Control Module (Pcm) Power Relay Sense Circuit High

P0690 - Electronic Control Module (ECM)/Powertrain Control Module (Pcm) Power Relay Sense Circuit High

WARNING: This page does not describe the selected car, but rather 32 other vehicles, including the 2008 Mercury Sable, 2008 Mercury Mountaineer, 2008 Mercury Milan, 2008 Mercury Mariner, and 2008 Mercury Grand Marquis. However, it is still accessible from the selected car via links, so may be relevant.
P0690 - ELECTRONIC CONTROL MODULE (ECM)/POWERTRAIN CONTROL MODULE (PCM) POWER RELAY SENSE CIRCUIT HIGH

Description:  This DTC sets when the passive anti theft system (PATS) system indicates the key is in the OFF, ACC, or LOCK position and the ignition switch position run (ISP-R) circuit indicates ON or START position.
Possible Causes: 
  • ISP-R circuit short to voltage in the harness
  • Damaged PATS system
  • Damaged ignition switch
Diagnostic Aids:  Diagnose and repair all PATS DTCs first.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All   refer to PINPOINT TEST B .