P0685 - Electronic Control Module (ECM)/Powertrain Control Module (Pcm) Power Relay Control Circuit/Open
WARNING: This page does not describe the selected car, but rather 32 other vehicles, including the 2008 Mercury Sable, 2008 Mercury Mountaineer, 2008 Mercury Milan, 2008 Mercury Mariner, and 2008 Mercury Grand Marquis. However, it is still accessible from the selected car via links, so may be relevant.
P0685 - ELECTRONIC CONTROL MODULE (ECM)/POWERTRAIN CONTROL MODULE (PCM) POWER RELAY CONTROL CIRCUIT/OPEN
| Description: | This DTC sets when the ignition switch position run (ISP-R) circuit indicates the key is in the OFF, ACC, or LOCK position, and the amount of time the PCM remains powered through the PCM power relay exceeds a predetermined amount of time. | |||
| Possible Causes: |
|
|||
| Diagnostic Aids: | Ability to communicate with the PCM when the key is in the OFF, ACC, or LOCK position indicates a hard fault. | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory | |
| All | refer to PINPOINT TEST B . | |||