P0097 - Intake Air Temperature Sensor 2 Circuit Low
WARNING: This page does not describe the selected car, but rather 32 other vehicles, including the 2008 Mercury Sable, 2008 Mercury Mountaineer, 2008 Mercury Milan, 2008 Mercury Mariner, and 2008 Mercury Grand Marquis. However, it is still accessible from the selected car via links, so may be relevant.
P0097 - INTAKE AIR TEMPERATURE SENSOR 2 CIRCUIT LOW
| Description: | Indicates the sensor signal is less than the self-test minimum. The intake air temperature 2 (IAT2) sensor minimum is 0.2 volt. | |||
| Possible Causes: |
|
|||
| Diagnostic Aids: | Monitor the IAT2 PID value. A typical IAT2 temperature should be greater than the IAT1 temperature. | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory | |
| All | refer to PINPOINT TEST DU . | |||