LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 209 (Disc Brakes - Excursion, F250-F550 Super Duty) >> Torque Specifications >> F250 & F350 Super Duty Pickups

F250 & F350 Super Duty Pickups

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2003 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS F250 & 350 SUPER DUTY PICKUPS

Application Ft. Lbs. (N.m)
Axle Shaft-To-Hub Bolts
Dana Axle 105 (142)
Ford Axle 80 (108)
Brake Booster Mounting Nuts 18 (24)
Brake Pedal Bracket Nuts 18 (24)
Brake Pedal Bracket Bolt 18 (24)
Brake Pressure Switch 13 (18)
Front Caliper Anchor Plate Bolts 166 (225)
Front Caliper Bleeder Screw 26 (35)
Front Caliper Bolts 42 (57)
Front Caliper Hose Bolt 26 (35)
Front Wheel Hub Extender Nuts 130 (176)
Master Cylinder Brake Line Fittings 13 (18)
Master Cylinder Retainer Nuts 20 (27)
Parking Brake Control Retaining Nuts 19 (26)
Parking Brake Rear Cable & Conduit Retaining Bolts 28-37 (38-50)
Power Steering Tube Bracket Nuts 30 (41)
Power Steering Tube Fittings (High Pressure) 26 (35)
Power Steering Tube Fitting (Low Pressure/Return Hose) 16 (22)
Rear Caliper Adapter Bolts (Ford Axle) 150 (203)
Rear Caliper Adapter Bolts (Dana Axle) 100 (136)
Rear Caliper Anchor Plate Bolts 128 (174)
Rear Caliper Bleeder Screw 26 (35)
Rear Caliper Bolts 27 (37)
Rear Caliper Hose Bolt 37 (50)
Rear Caliper Support Bracket-To-Rear Axle Flange Nuts
F250 & F350 With Ford Axle 150 (203)
F350 With Dana Axle 100 (136)
Rear Brake Disc-To-Rear Hub Bolts 66-88 (89-119)
Rear Disc Shield Bolts (Ford Axle) 12 (16)
Rear Hub Nut
Dana Axle (1)
Ford Axle (2)
Rotor-To-Rear Hub Bolts 94 (127)
Spindle Nut (Front 2WD) (3)
Stone Shield Nuts 46 (62)
Wheel Lug Nuts (8-Lug M-14 Wheel Bolts) 165 (224)
INCH Lbs. (N.m) 
Front Disc Shield Bolts 97 (11)
Rear Disc Shield Bolts (Ford Axle) 97 (11)
Rear Hub Rotating Torque (Maximum) 20 (2.3)
Vacuum Pump Bolts 80-106 (9-12)
(1) Tighten to 70 Ft. Lbs. (95 N.m), back off nut 90 degrees, tighten again to 18 Ft. Lbs. (24 N.m). Final bearing adjustment has zero end play.
(2) Tighten to 60 Ft. Lbs. (81 N.m) while rotating rear hub assembly.
(3) Tighten spindle nut while rotating rotor. Loosen 2 turns. Tighten spindle nut to 17-24 Ft. Lbs. (23-33 N.m) while rotating rotor. Loosen spindle nut 175 degrees. Tighten spindle nut to 17 INCH Lbs. (2 N.m) while rotating rotor.