LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 209 (Disc Brakes - Excursion, F250-F550 Super Duty) >> Component Tests >> Check Valve (Vacuum Booster)

Check Valve (Vacuum Booster)

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2003 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.

The function of the power brake booster check valve is to allow manifold vacuum to enter the power brake booster and prevent the escape of vacuum in case manifold vacuum is lost during sustained full throttle operation. To test the function of the power brake booster check valve :

  1. Start and run the engine for at least 10 seconds.
  2. Operate the brake pedal to check for power assist.
  3. Disconnect the vacuum booster hose from the power brake booster. Do not remove the power brake booster check valve from the power brake booster.
  4. There should be enough vacuum retained in the power brake booster for at least one more power-assisted brake operation. Replace the power brake booster check valve if it fails the test.

scientia non olet · About LEMON Manuals