LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2089 (Engine Controls - Description And Operation (Except Diesel & Hybrid)) >> Powertrain Control Hardware >> Powertrain Control Module (PCM)

Powertrain Control Module (PCM)

WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2008 Mercury Sable, 2008 Mercury Mountaineer, 2008 Mercury Milan, 2008 Mercury Mariner, and 2008 Mercury Grand Marquis. However, it is still accessible from the selected car via links, so may be relevant.

The center of the electronic engine control (EEC) system is a microprocessor called the PCM. The PCM receives input from sensors and other electronic components (switches, relays). Based on the information received and programmed into its memory, the PCM generates output signals to control various relays, solenoids and actuators. There are several different types of PCMs in use for this model year. Refer to the Vehicle PCM Application Table below for PCM types and their applications.

VEHICLE PCM APPLICATION TABLE

PCM Type Applications
140-Pin Expedition, Fusion, Milan, MKZ, Navigator
150-Pin Escape, Mariner
170-Pin Crown Victoria, E-Series, Explorer, Explorer Sport Trac, F-Super Duty, Grand Marquis, Mountaineer, Mustang, Ranger, Town Car
190-Pin Edge, F-Series, Focus, Mark LT, MKX, Sable, Taurus, Taurus X