Speaker Walk-Around Test (Premium CD6 Only)
WARNING: This page is about a different car, the 2007 Mercury Mariner and 2007 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
To enter the speaker walk-around test or the audio unit self-diagnostic mode, the audio unit must be turned on and in the tuner mode (AM/FM).
- To enter the speaker walk-around test, simultaneously press and hold the audio unit POWER button and the AUTO-S button.
- The speaker walk-around test stops at each speaker and applies sound to each speaker for about 1-2 seconds. Each speaker is tested and displayed on the audio unit in the following sequence: RF, LF, LR and RR.
- The speaker walk-around test will self cancel.