LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 208 (Disc Brakes & Drum Brakes) >> Overhaul >> Wheel Cylinders >> Reassembly

Wheel Cylinders: Reassembly

WARNING: This page is about a different car, the 2004 Ford Escape, 2003 Ford Escape, and 2002 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

Inspect the rear wheel cylinder bore for wear, rust or pits. If any of these conditions exist, install a new wheel cylinder. Coat all parts with clean brake fluid. To assemble, reverse disassembly procedure. Clamp brake cylinder pistons against ends of cylinder.

scientia non olet · About LEMON Manuals