LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 208 (Disc Brakes & Drum Brakes) >> Overhaul >> Master Cylinder >> Inspection

Master Cylinder: Inspection

WARNING: This page is about a different car, the 2004 Ford Escape, 2003 Ford Escape, and 2002 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Manufacturer does not recommend honing cylinder bore.

Clean all parts with isopropyl alcohol and blow dry with compressed air. Ensure all ports and vents are open and free of foreign matter. Inspect master cylinder bore and all parts for excessive wear or damage. If bore is damaged, replace master cylinder.

scientia non olet · About LEMON Manuals