Master Cylinder Reservoir Brake Fluid Level Warning Switch
WARNING: This page is about a different car, the 2004 Ford Escape, 2003 Ford Escape, and 2002 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
The brake fluid level warning switch is an integral part of the brake master cylinder reservoir. It consists of a float containing a magnet and a reed switch mounted in the bottom of the brake master cylinder reservoir.
When the brake fluid in the brake master cylinder reservoir gets to a predetermined level, the float and magnet actuates the reed switch that causes the Red brake warning indicator to illuminate. Loss of brake fluid from either the primary (front) or secondary (rear) system will cause this system to activate. If the brake fluid level warning switch is inoperative, a new brake master cylinder reservoir must be installed.