Brake Lines and Hoses
WARNING: This page is about a different car, the 2004 Ford Escape, 2003 Ford Escape, and 2002 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
Steel tubing is used throughout the brake hydraulic system. All brake tube fittings must be correctly double flared to provide strong leakproof connections. If a section of brake tube is damaged, the entire section must be removed and a new tube of the same type, size, shape and length installed. When installing new hydraulic brake lines, hoses, or connectors, tighten all connections securely. After installation, bleed the brake system.