LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 208 (Disc Brakes & Drum Brakes) >> Adjustments >> Parking Brake Cable >> Vehicle With High Series Floor Console

Vehicle With High Series Floor Console

WARNING: This page is about a different car, the 2004 Ford Escape, 2003 Ford Escape, and 2002 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply the parking brake. Remove the floor console finish panel.
  2. Remove the adjustment nut clip. See Figure .
  3. Turn the parking brake control adjustment nut so that the parking brake control stroke is three to five notches when pulled.
  4. Confirm the parking brake is applied.
  5. Install the adjustment nut clip.
  6. To install, reverse removal procedure.