Brake Pedal Position Switch & Speed Control DEACTIVATOR Switch
WARNING: This page is about a different car, the 2004 Ford Escape, 2003 Ford Escape, and 2002 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
Initial installation of Brake Pedal Position (BPP) and speed control deactivator switch allows for one adjustment. If additional adjustments are necessary, install a new switch. To unlock, rotate the lock knob counterclockwise to the stop. See Fig 1 . With the engine running, fully depress and hold the brake pedal. Install the BPP or deactivator switch. Position the switch in the bracket and rotate counterclockwise. Connect the electrical connector. Slowly release the brake pedal.