LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 207 (Disc Brakes & Drum Brakes) >> Overhaul >> Master Cylinder >> Reassembly

Master Cylinder: Reassembly

WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2004 Ford RV Cutaway, 2004 Ford Econoline, 2004 Ford E450 Super Duty, 2004 Ford Cutaway, and 2003 Ford RV Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

Lubricate all components, including cylinder bore, with clean brake fluid. Install NEW grommets and plastic reservoir. Carefully insert piston assembly into master cylinder bore. If cylinder is equipped with piston stop pin, depress piston and install pin. Install other piston assembly into cylinder. Depress piston and install snap ring in groove.

scientia non olet · About LEMON Manuals