Inertia Fuel Shutoff (IFS) Switch
WARNING: This page is about a different car, the 2007 Mercury Mariner and 2007 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
| Item | Part Number | Description |
|---|---|---|
| 1 | 14A464 | Inertia fuel shutoff (IFS) switch electrical connector |
| 2 | W504148 | IFS mounting bolts (2 required) |
| 3 | 9341 | IFS switch |
- Remove the RH lower A-pillar trim panel. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION article.
- Disconnect the inertia fuel shutoff (IFS) switch electrical connector.
- Remove the 2 bolts and the IFS switch.
- To install, tighten to 10 Nm (89 lb-in).
- To install, reverse the removal procedure.