Wheel Cylinders: Reassembly
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Ford Pickup Heritage, 2004 Ford Pickup, 2003 Lincoln Blackwood, 2003 Ford Pickup, and 2002 Lincoln Blackwood. However, it is still accessible from the selected car via links, so may be relevant.
If cylinder bore is lightly pitted or scratched, hone or replace as necessary. DO NOT hone cylinders more than .003" (.08 mm). Coat all parts with clean brake fluid. To assemble, reverse disassembly procedure. Clamp brake cylinder pistons against ends of cylinder.