LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 205 (Air Bag Restraint Systems) >> Removal & Installation >> Electronic Crash Sensor (ECS) Module >> Removal

Electronic Crash Sensor (ECS) Module: Removal

WARNING: This page is about a different car, the 2003 Ford Econoline. However, it is still accessible from the selected car via links, so may be relevant.
  1. Before proceeding, see AIR BAG SAFETY PRECAUTIONS  . ECS module is located behind right cowl side kick trim panel. Disable air bag system. See DISABLING SYSTEM  under DISABLING & ACTIVATING AIR BAG SYSTEM.
  2. Remove right cowl side kick trim panel. Disengage ECS module connector locking clip and disconnect ECS module connector. Remove 3 ECS module mounting bolts and ECS module.