LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2037 (Wiper System And Washer System) >> Diagnostic Tests >> Wipers and Washers >> Pinpoint Tests >> Pinpoint Test B: The Rear Window Wiper is Inoperative >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2007 Mercury Mariner and 2007 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

The rear wiper motor is controlled by the SJB. The SJB supplies power to the rear wiper motor through circuit 411 (BK/LB) from the integrated rear wiper relay and through circuit 406 (BN/WH) from the SJB fuse 21 (15A). The multi-function switch applies ground to circuit 485 (PK/BK) for low speed wipe or applies ground to circuit 410 (WH/OG) for intermittent wipe. The multi-function switch and the rear wiper motor are grounded through circuit 57 (BK).

Possible Causes

scientia non olet · About LEMON Manuals